Release date: 12/12/2021
Variscite is pleased to inform about the new Boot2Qt Dunfell release for its i.MX8M Mini modules.
Modules: DART-MX8M-MINI, VAR-SOM-MX8M-MINI
Release: b2qt-dunfell-dart-mx8mm-v1.1
Details:
- Filesystem:
Boot2Qt Dunfell (Qt 6.0.4) - Linux kernel:
Variscite 5.4-2.1.x-imx_var01 branch (based on FSL community branch 5.4-2.1.x-imx, which is based on NXP’s Linux 5.4.24_2.1.0 release and the Linux mainline kernel 5.4.142). - U-Boot:
Variscite imx_v2020.04_5.4.24_2.1.0_var02 branch (based on NXP branch imx_v2020.04_5.4.24_2.1.0, which is based on U-Boot v2020.04).
Noteworthy updates since 1.0:
Release 1.1
meta-variscite-boot2qt:
- Updated Qt to version 6.0.4
- b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools
- manifest: meta-variscite-fslc: Update to latest
U-Boot updates:
- imx8mm-var-som: Use default DDR4 QoS settings – This fixes USB performance issues
- imx8 soms: Add USE_EMMC_BOOT_PART config to use user partition for fastboot
- imx8mm_var_dart: Set console environment variable in the default environment
Linux updates:
- Upgraded to version 5.4.142
- imx8_var_defconfig: add full docker support
- Introduce support for pcal6408 (pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A)
- Revert “MLK-14801 input: touch: ads7846: fix the pressure_max setting”
- sn65dsi83: Add device tree property to swap LVDS Channel A/B
- imx8mm-var-som: Disable usbotg1 hnp, srp, and adp
- imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp
- Revert “gpio: pca953x: Disable PM routines”
- ARM: configs: Variscite: Enable USB_HSIC_USB3053
- ARM: configs: Variscite: disable EVBUG module
- ARM64: dts: imx8: Variscite: add WM8904 DRC support for all SoMs
- ASoC: wm8904: add DMIC support
- ASoC: wm8904: extend device tree support
- Revert “ASoC: wm8904: add DMIC support and allow enabling it”
External Information
Release notes
Developers info: DART-MX8M-MINI, VAR-SOM-MX8M-MINI